Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Stroker Golf Motor
05-16-2013, 07:54 AM
Post: #1
Stroker Golf Motor
Hi All

i want to build a stroker Golf motor for my Camper, i have a 2E in it currently, but i have a 1,9TD AAZ block and crank.
here are the specs on the motors
2E- Bore 82.5mm stroke 92.8mm size in cc 1984cc
AAZ- bore 79.5mm stroke 95.5mm size in cc 1896cc

i want to use the 2E block and pistons with the AAZ crank giving me the following:
bore 82.5mm stroke 95.5mm size in cc 2040cc

does anyone have info on this and or has anyone build one or can recommend an engine builder that can do this.
need to know which conrods etc to use, thanks

it will still run with MP9 using all the ancillaries from my syncro,

Thanks Stuart
083 629 9951

I may be a mechanic, but i can't fix stupid
Bad planning on your part does not make your issue an crisis to me
Bad workmanship by other garages does not entiltle you to better rates at me
Syncro, syncro , syncro and more syncro, this is the syncro way of life
Visit this user's website Find all posts by this user
Quote this message in a reply
05-16-2013, 10:05 AM
Post: #2
Re: Stroker Golf Motor
Not knowing what a stroker motor is, I had to google :-)
Maybe read this:http://www.vwclub.co.za/phpbb3/viewtopic...2&t=150798
There seems to be people who know how to do it safely.

I'll show you a place
High on a desert plain
Where the streets have no name
Find all posts by this user
Quote this message in a reply
05-16-2013, 11:23 AM
Post: #3
Re: Stroker Golf Motor
Ive heard that strokers tend to run bearings more often....
Not a very reliable option according to what ive heard.

You have the Bus, use it, enjoy nature!
Find all posts by this user
Quote this message in a reply
05-16-2013, 11:31 AM
Post: #4
Re: Stroker Golf Motor
Pieter Botha has one or a similar setup in his Syncro.
Ill send you his number. He build his own...

You have the Bus, use it, enjoy nature!
Find all posts by this user
Quote this message in a reply
05-16-2013, 01:42 PM
Post: #5
Re: Stroker Golf Motor
one of the comments on the subject I read on the interwebs said: "with increased compression comes increased responsibility"
:-)

I'll show you a place
High on a desert plain
Where the streets have no name
Find all posts by this user
Quote this message in a reply
05-17-2013, 08:56 AM
Post: #6
Re: Stroker Golf Motor
Hi Phil

they are building serious performance motors, high compression etc, i want a standard compression motor, just with a little more low down torque, that is gained with the longer stroke, this is an off-road car not a drag racer, don't need 120kw and 250nm, only want approx 95kw and 210-220nm

everything will be standard, other than the crank, no lightened flywheels etc like the boy racers do,

Stuart

I may be a mechanic, but i can't fix stupid
Bad planning on your part does not make your issue an crisis to me
Bad workmanship by other garages does not entiltle you to better rates at me
Syncro, syncro , syncro and more syncro, this is the syncro way of life
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)